INCH-POUND
MIL-S-27626F (USAF)
10 January 2013
SUPERSEDING
MIL-S-27626E (USAF)
29 May 2012
MILITARY SPECIFICATION
SAMPLER, CRYOGENIC LIQUID
Inactive for new design after 24 April 1981
This specification is approved for use by the Department of the Air Force and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a cryogenic liquid sampler consisting of a sampling assembly, shipping cylinder and accessories.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to:
* WR-ALC/GRVEA, Robins AFB GA 31098-1813. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online database at https://assist.dla.mil.
AMSC N/A FSC 6695
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business